(as of Feb 19,2021 08:41:15 UTC – Details)
The CM-2010 features the industry’s most stable and longest life sensor. The sensors never require re-calibration and have a 10 year life-span. CM-2010 includes a key ring and lanyard to go wherever you go. The CM-2010 can be left ON continuously and the battery will last many years. Check the battery before each use. When needed the CR2032 battery can be easily replaced. The louder alarm of the CM-2010 series allows it to exceed all of the recommendations in section B.2.3 of DOT/FAA/AR-09/49. Residential carbon monoxide detectors in accordance with UL 2034 purposefully delay their response for hours at low carbon monoxide levels. The CM-2010 responds in less than 60 seconds and begins alerting at only 25ppm. Alerting faster and at lower levels allows individuals to know about their exposure and take appropriate actions sooner. Alarm levels: 25 to 99 ppm, industry standard T4 signal for carbon monoxide. 4 fast beeps & flashes followed by a 5 second pause, repeats until the carbon monoxide levels are below 25 ppm. 100 to 199 ppm, 4 fast beeps, 1 second pause, 1 long beep, 4 second pause. 200 to 299 ppm, 4 fast beeps, 1 second pause, 2 long beeps, 4 second pause. 300 to 399 ppm, 4 fast beeps, 1 second pause, 3 long beeps, 4 second pause. ≥400 ppm, 4 fast beeps, 1 second pause, 4 long beeps, 4 second pause.
Never needs re-calibration
Starts alarming at 25 ppm
Progressive alarms indicating ≥ 100, ≥ 200, ≥ 300 and ≥ 400 ppm
Exceeds DOT/FAA/AR-09/49 recommendations